50+ FAQs and Step by Step Guide for Yamaha Raptor 700 Users

We know a lot of frequently asked questions in your mind about your Yamaha Raptor 700 ATV, and all the questions not answered on the internet, In this article our team try to help you out with some of the common questions answered and step by step guide for Yamaha raptor 700 users, hope our article helps you a bit.

1. How fast is a raptor 700?

The raptor 700 can go up to 85 miles per hour.

2. How long is a raptor 700?

A raptor 700 is approximately six feet long.

3. How many gears does a raptor 700 have?

The raptor 700 has five gears.

4. How many quarts of oil does a raptor 700 take?

A raptor 700 takes 4 quarts of oil.

5. How much is a 2020 raptor 700?

The 2020 Raptor 700 Average Retail Price $8,405

6. How fast does a raptor 700 go?

The raptor 700 goes about 85 miles per hour.

7. How fast does a Yamaha raptor 700 go?

The Yamaha Raptor 700 goes about 85 miles per hour.

8. How much horsepower does a raptor 700 have?

A raptor 700 has about 45 horsepower.

9. How much hp does a raptor 700 have?

The Raptor 700 has a 700cc engine that produces around 50-70 horsepower.

10. Can-am Renegade 800 vs Raptor 700?

There is no definitive answer to this question as it depends on personal preferences. Some people may prefer the Can Am Renegade 800 because it is more powerful and has a longer wheelbase. Others may prefer the Yamaha Raptor 700 because it is lighter and more agile. Ultimately, it is up to the individual to decide which ATV is right for them.

11. How much oil does a Yamaha raptor 700 take?

The Yamaha Raptor 700 takes about 3.4 quarts of oil.

12. How to wheelie raptor 700?

To wheelie a raptor 700, you will need to shift your weight to the rear and apply gas. As you apply gas, slowly release the clutch until the front wheel comes off the ground.

13. How to charge the raptor 700 battery?

There is no one-size-fits-all answer to this question, as the best way to charge a raptor 700 battery may vary depending on the make and model of the battery. However, some tips on how to charge a raptor 700 battery may include charging the battery at a lower voltage setting, using a battery charger specifically designed for lithium ion batteries, and avoiding overcharging the battery.

14. Is raptor 700 automatic?

No, the raptor 700 is not automatic.

15. How often to change oil raptor 700?

The manufacturer recommends that the oil be changed every 5000 miles.

16. How to change the oil on a raptor 700?

To change the oil on a Raptor 700, you will need to drain the oil from the engine, remove the oil filter, and then refill the engine with new oil.

17. How to lower raptor 700?

There is not a definitive answer, as there are many ways to lower a raptor 700. Some common methods include installing lower handlebars, using lower footpegs, and adjusting the suspension.

18. How to put raptor 700 in reverse?

There is a switch on the handlebars that you need to engage in order to put the raptor 700 in reverse.

19. How to wheelie a raptor 700?

Raise the front end of the bike by pulling up on the handlebars. Keep the front end raised until the bike is balanced on the rear wheel. Apply the throttle to maintain your balance.

20. What kind of coolant does a raptor 700 take?

The raptor 700 takes a 50/50 coolant mix.

21. What oil does a raptor 700 take?

The Raptor 700 takes 5W-40 synthetic oil.

22. What’s the difference between the raptor 700 and 700r?

The raptor 700 is the older model and the 700r is the newer model. The 700r has a few more horsepower and a different transmission.

23. How many CC is a Yamaha raptor 700?

The Yamaha Raptor 700 has a 686cc four-stroke, liquid-cooled engine.

24. How much does a raptor 700 cost?

The cost of a raptor 700 can vary depending on the model, year, and whether or not it is new or used. A new raptor 700 can cost anywhere from $6,299 to $9,499, while a used raptor 700 can cost anywhere from $3,500 to $6,000.

25. How to check oil on Yamaha raptor 700?

There is an oil level dipstick on the left side of the engine, near the front. To check the oil level, remove the dipstick and wipe it clean. Reinsert the dipstick and remove it again to check the oil level. The oil level should be between the two markings on the dipstick. If it is lower than the lower mark, add oil until it reaches the upper mark.

26. How to make a raptor 700 faster?

There are a few ways to make a raptor 700 faster. One way is to add a power commander and tune it for more power. Another way is to add a slip-on exhaust.

27. How to put a raptor 700 in reverse?

There is a switch on the handlebars that must be moved to the reverse position.

28. How wide is a raptor 700?

A raptor 700 is about 50 inches wide.

29. Is a raptor 700 faster than a yfz450?

The Yamaha YFZ 450 is faster than the Honda Raptor 700.

30. What is the top speed of a Yamaha raptor 700?

The top speed of a Yamaha Raptor 700 is around 85 miles per hour.

31. What oil should I use in my raptor 700?

The best oil to use in a Raptor 700 is 10W-40.

32. Will raptor 700 plastics fit a 660?

No, raptor 700 plastics will not fit a 660.

33. How much does a raptor 700 weight?

The Raptor 700 weighs around 450 pounds.

34. Are all raptor 700 fuel injected?

No, not all raptor 700s are fuel injected. Some older models are carbureted.

35. Are YFZ 450 and raptor 700 oil filters the same?

No, the oil filters are not the same.

36. Can you race raptor 700 at GNCC?

The Yamaha Raptor 700 is not eligible to race in the GNCC series.

37. Do the 2008 raptor 700 have an hour meter?

No, the 2008 Raptor 700 does not have an hour meter.

38. How big should you be to ride raptor 700?

There is no definitive answer, but most riders should be at least 5 feet tall to ride a Raptor 700 comfortably.

39. How long to change the raptor 700 clutches?

It depends on the model of the raptor 700, but it should take about 1-2 hours to complete the job.

40. How long to charge motion Trendz battery raptor 700?

The battery for the Motion Trendz Raptor 700 should be charged for about 3-4 hours.

41. How many cylinders does a raptor 700 have?

The raptor 700 has six cylinders.

42. How many RPMs on raptor 700 before redline?

The Raptor 700 has a redline of 7,250 RPM.

43. How many Yamaha raptors 700 were sold in the USA?

There is no definitive answer to this question as sales figures are not publicly available. However, it is estimated that between 10,000 and 20,000 Yamaha Raptor 700s have been sold in the United States since the model was introduced in 2006.

44. How to adjust clutch cable on raptor 700?

First, you’ll need to remove the old cable from the housing. To do this, use a pair of pliers to squeeze the ferrule at the end of the cable, then pull the cable out of the housing. Next, thread the new cable through the housing, making sure that the ferrule is correctly seated in the housing. Then, use a pair of pliers to crimp the ferrule onto the end of the cable. Finally, adjust the cable tension so that there is about 3/16″ of play in the cable at the lever. (In short: There is an adjusting nut on the cable where it attaches to the lever. Loosen the nut and turn the adjuster to take up slack in the cable.)

45. How to adjust fuel on raptor 700?

The easiest way to adjust the fuel on a raptor 700 is to use the fuel screw. This is located on the carburetor and is turned with a screwdriver. Turning it clockwise will lean the mixture, and turning it counterclockwise will richen the mixture.

46. How to disassemble raptor 700 fuel pump?

There is not a definitive answer to this question since there can be slight variations in the fuel pump design between different raptor 700 models. However, in general, you will need to remove the gas tank and then unscrew the fuel pump from the bottom of the tank. Once the pump is removed, you can then disconnect the wires and hoses and carefully disassemble the pump to clean or replace the parts as needed.

47. What are good tires for a Yamaha raptor 700 go?

There is no definitive answer to this question as it depends on a variety of factors, such as terrain, driving style, and personal preference. However, some popular tires for the Yamaha Raptor 700 include the Maxxis Razr, Kenda Klaw, and Dunlop Duro.

48. What is a raptor 700 top speed?

A raptor 700 top speed is approximately 77 to 85 mph.

49. What size battery for 700 raptors? 

The battery size for the 700 raptors is a 12-volt battery.

50. What size paddle tire for raptor 700? 

The recommended size paddle tire for the Yamaha Raptor 700 is a 20×10-9.

51. What the best exhaust for a raptor 700?

The answer to this question is dependent upon a number of factors, including what you intend to use your raptor for and what kind of sound you are looking for. Some popular exhaust systems for the raptor 700 include the FMF PowerBomb header and muffler, the Pro Circuit T-4 exhaust system, and the Yoshimura RS-4 stainless steel exhaust system.

52. Where are Yamaha raptor 700 built?

The Yamaha Raptor 700 is built in Japan.

53. Why is raptor 700 leaking coolant?

There could be a few reasons why the raptor 700 is leaking coolant. A hole in the radiator, a loose hose, or a crack in the engine block could all be potential sources of the leak. If you can’t identify the source of the leak, you may need to take the raptor 700 to a mechanic for further diagnosis.

54. Why my raptor 700 gets hot?

There are several possible reasons for this:

1. The engine is running too hot. Check the engine coolant level and make sure it is full.

2. The radiator fins are clogged. Clean the radiator fins with a brush or compressed air.

3. The radiator cap is not sealing properly. Replace the radiator cap.

4. The cooling fan is not working. Check the cooling fan fuse and replace it if necessary.

Some Step By Step Guide for Yamaha Raptor 700 Users

1. How to change oil on raptor 700? – Step by Step Guide

1. Park the raptor on a level surface and set the parking brake.

2. Place a pan underneath the oil drain plug to catch the oil.

3. Remove the oil drain plug and allow the oil to drain into the pan.

4. Replace the oil drain plug and tighten it to specifications.

5. Fill the engine with the recommended oil.

6. Start the engine and let it run for a few minutes.

7. Check the oil level and add more if necessary.

2. How to drive a raptor 700? – Step by Step Guide

The following are instructions on how to drive a Raptor 700:

1. Sit in the driver’s seat and put on the safety belt.

2. Start the engine by turning the key to the “on” position.

3. Depress the clutch pedal with your left foot and move the gearshift lever into the first gear.

4. Release the clutch pedal slowly and at the same time, give the throttle a slight twist with your right hand.

5. As the vehicle begins to move, continue to give the throttle a twist until the engine reaches its optimum speed.

6. To shift gears, depress the clutch pedal again and move the gearshift lever into the next gear. Then, release the clutch pedal and give the throttle a twist.

3. How to charge the raptor 700 battery?

1. Park the ATV on a level surface and set the parking brake.

2. Remove the seat to access the battery.

3. Connect the negative black lead from the charger to the negative terminal on the battery.

4. Connect the positive red lead from the charger to the positive terminal on the battery.

5. Plug in the charger and turn it on.

6. Charge the battery until it is full.

7. Unplug the charger and remove the leads from the terminals.

8. Replace the seat.

4. How to adjust the rear shock on raptor 700?

1. Park your Raptor on a level surface and engage the parking brake.

2. Place a jack under the rear of the ATV, just behind the rear axle.

3. Lift the rear of the ATV off the ground until the rear wheels are clear of the ground.

4. Locate the rear shock absorbers. There will be one on each side of the rear axle.

5. Locate the preload adjuster on each shock. The preload adjuster is a knob or lever on the top of the shock that is used to adjust the preload, or tension, on the spring.

6. Turn the preload adjuster on one of the shocks clockwise to increase the preload, or counterclockwise to decrease the preload.

7. Repeat Step 6 on the other shock.

8. Lower the ATV back to the ground and test ride the ATV to see how the new settings feel.

5. How to change the front sprocket on raptor 700?

1. Remove the front wheel and axle.

2. Unscrew the four bolts that hold the sprocket cover in place.

3. Remove the sprocket cover and old sprocket.

4. Install the new sprocket and replace the sprocket cover.

5. Screw the four bolts back in place.

6. Reinstall the front wheel and axle.

6. How to change rear axle bearings on raptor 700?

1. Loosen the axle nut with a wrench.

2. Unbolt the brake caliper from the frame and remove it.

3. Unscrew the axle nut completely and remove the axle.

4. Remove the old bearings from the axle housing.

5. Clean the axle housing with a rag.

6. Place the new bearings into the axle housing.

7. Screw the axle back into the housing.

8. Reattach the brake caliper to the frame.

9. Tighten the axle nut with a wrench.

7. How to change rear bearings raptor 700?

1. Park the vehicle on a level surface and set the emergency brake.

2. Loosen the axle nut with a wrench.

3. Raise the rear end of the vehicle with a jack and support it with jack stands.

4. Remove the rear wheels.

5. Unbolt the brake caliper and remove it from the rotor.

6. Suspend the caliper with a wire so it doesn’t hang by the brake line.

7. Remove the cotter pin and nut from the end of the axle.

8. Pull the axle out of the hub.

9. Remove the old bearings from the hub.

10. Install the new bearings in the hub.

11. Reinstall the axle in the hub.

12. Torque the nut to the specified value.

13. Reinstall the cotter pin.

14. Reinstall the brake caliper and torque the bolts to the specified value.

15. Reinstall the rear wheels and torque the lug nuts to the specified value.

16. Lower the vehicle.

8. How to change the rear sprocket on Yamaha raptor 700?

1. Park your Yamaha Raptor 700 on a level surface and set the parking brake. Place blocks in front of the front tires to prevent the quad from rolling while you work.

2. Loosen the axle nut with a socket wrench. Remove the nut and washer, and then pull the axle out of the way.

3. Unscrew the sprocket bolts with a socket wrench. Remove the sprocket and chain.

4. Install the new sprocket on the shaft, and then screw on the bolts. Torque the bolts to the manufacturer’s specifications.

5. Reinstall the axle, and then tighten the nut.

6. Lower the quad off the blocks, and then test ride it to make sure the new sprocket is functioning properly.

9. How to drain gas out of a raptor 700?

1. Start by turning off the gas valve.

2. Next, disconnect the fuel line from the carburetor.

3. Now, open the drain valve on the bottom of the gas tank and allow the gas to drain out.

4. Once the gas has drained out, close the drain valve and reconnect the fuel line to the carburetor.

5. Finally, turn on the gas valve and check for leaks.

10. How to install nerf bars on a raptor 700?

1. Park your Raptor 700 on a level surface and place blocks under the wheels to prevent it from rolling.

2. Remove the bolts that secure the nerf bars to the frame using a socket wrench.

3. Line up the holes on the nerf bars with the holes on the frame and insert the bolts.

4. Tighten the bolts using a socket wrench.

11. How to rebuild raptor 700 water pump?

1. Remove the bolts that secure the water pump cover to the engine using a wrench.

2. Remove the cover and gasket from the engine.

3. Clean the gasket mating surface on the engine with a gasket scraper.

4. Inspect the impeller for wear or damage.

5. Remove the impeller from the water pump housing.

6. Install the new impeller in the housing.

7. Install the water pump cover on the engine and secure it in place with the bolts.

8. Fill the cooling system with coolant and bleed the air out of the system.

We hope you had a good experience reading all the FAQs and Step by Step Guide about the Yamaha Raptor 700. If you have other questions or comments, feel free to email us or write that down in the comments box below, We will try our best to respond as quickly as possible.

Leave a Comment